Al Dimeola using Taurus Dexter Octaver pedal
NEW YORK, NY – Jun 1 2014 – Osiamo, LLC and Taurus are proud to announce guitar legend Al Di Meola as a user of the Dexter octave pedal by Taurus.
The Dexter is a -1/+1 octaver that tracks equally as well on guitar and bass. Both upper and lower octaves have independent “range” controls which allows the user to emphasize either the up, down or both octaves.
This 12 volt pedal utilizes 24 bit technology. This helps eliminate unwanted glitches and assists the pedal’s polyphonic ability thus making this THE octaver for guitarists who wish to play multi-note chords!
Click here to watch videos.
LEVEL (-1) – LO-octave level adjustment.
RANGE (-1) – LO-octave frequency range adjustment.
In the MAX position the lower octave runs throughout the bandwidth and reacts to the entire scale of sound. In the MIN position the lowest frequency is limited, which means that the lower octave reacts less effectively to the lowest frequency sounds. This way you can eliminate the lowest sound frequency, which is not clear and blurs the sound of an instrument when playing lower registers, leaving only the more desirable harmonics.
LEVEL (+1) – Hi-octave level adjustment.
RANGE (+1) – Hi-octave frequency range adjustment.
In the MAX position the upper octave runs throughout the bandwidth and reacts to the entire scale of sound. In the MIN position the highest frequency of the upper octave is limited – octaver processes the highest frequency sounds. This way you can eliminate very high frequencies, which may sound too high and artificial in some instruments when processed in upper octave.
OUT LEVEL – adjusting the output signal level
Power supply: external power supply 12V/150mA
Dimensions: (H x W x D) 65 x 122 x 144mm
Net weight: 0,6kg
Gross weight (Effect + power supply):1,0kg
For additional information or inquiries about the Dexter or other Taurus products contact Edward Matthiack or visit www.osiamo.com.
2753 Broadway Suite 333
New York, NY 10025